Our products are used as scaling & corrosion inhibitors for brackish and sea water reverse osmosis and nano filtration desalination plants. all the following products are based on phosphonate and polycarboxilate basis with synergistic mixture adapted for controlling inorganic scales. As well as they are compatible with all major RO-membranes. In general, they are not affected by chlorine or biocides when they are used as normal disinfectants.

Brackish Water Anti- Scalants

BWM 230 is used for controlling  inorganic scales of carbonate and sulfate in brackish water.It is normally used with an RO Feed TDS up to 5000 ppm.

BWM 200 is used for controlling inorganic scales of carbonate,sulfate, metal oxides and silica up to 140 mg/l in the RO-concentrate. It is normally used with an RO Feed TDS up to 15000 ppm.

BWM 330 is used for controlling inorganic scales of carbonate, sulfate, metal oxides and low silica up to 200 mg/l in the RO-concentrate in brackish water.

BWM 204 is used for controlling inorganic scales of carbonate, low sulfate, metal oxides and silica up to 250 mg/l in the RO-concentrate in brackish water.

BWM 333 is used for controlling inorganic scales of carbonate, sulfate, metal oxides and low silica up to 260 mg/l in the RO-concentrate in brackish water.

BWM 211 is used for controlling inorganic scales of carbonate, sulfate, metal oxides and silica up to 400 mg/l in the RO-concentrate in brackish water.

Sea Water Anti- Scalant

SWM 700 is used for controlling inorganic scales of carbonate and sulfate as well as silica and metal oxides to the usual concentrate level common in sea water and up to a recovery rate of 45%. It is normally used with RO high TDS sea water up to 45000 ppm.